https://www.youtube.com/watch?v=m61fllZSrGI
I filed this from a 3 foot old junker. Pitch 22 mm, set 15 thou, gullets 12 mm deep, hook angle ( some call this 'negative rake') 5 degrees, clearance angle 10 degrees.
DIY rip saw - and it works ☺
-
Gavin Longrain
- PostsCOLON 667
- JoinedCOLON May 17th, 2012, 10:51 am
- LocationCOLON Dalbeattie, near Dumfries, Scotland
- CONTACTCOLON
DIY rip saw - and it works ☺
https://www.youtube.com/watch?v=2qWyhgG25_U
https://www.youtube.com/watch?v=m61fllZSrGI
I filed this from a 3 foot old junker. Pitch 22 mm, set 15 thou, gullets 12 mm deep, hook angle ( some call this 'negative rake') 5 degrees, clearance angle 10 degrees.
https://www.youtube.com/watch?v=m61fllZSrGI
I filed this from a 3 foot old junker. Pitch 22 mm, set 15 thou, gullets 12 mm deep, hook angle ( some call this 'negative rake') 5 degrees, clearance angle 10 degrees.